It is a general principle of scholarly communication that the editor of a learned journal is solely and independently responsible for deciding which articles submitted to the journal shall be published. In making this decision the editor is guided by policies of the journal's editorial board and constrained by such legal requirements in force regarding libel, copyright infringement and plagiarism.  An outcome of this principle is the importance of the scholarly archive as a permanent, historic record of the transactions of scholarship. Articles that have been published shall remain extant, exact and unaltered as far as is possible. However, very occasionally circumstances may arise where an article is published that must later be retracted or even removed. Such actions must not be undertaken lightly and can only occur under exceptional circumstances. In all cases, our official archives at the National Library of the Netherlands will retain all article versions, including retracted or otherwise removed articles.

This policy has been designed to address these concerns and to take into account current best practice in the scholarly and library communities.  As standards evolve and change, we will revisit this issue and welcome the input of scholarly and library communities. We believe these issues require international standards and we will be active in lobbying various information bodies to establish international standards and best practices that the publishing and information industries can adopt.  See also the National Library of Medicine's policy on retractions and the recommendations of the International Committee of Medical Journal Editors (ICMJE) concerning corrections and retractions.

Article withdrawal

Only used for Articles in Press which represent early versions of articles and sometimes contain errors, or may have been accidentally submitted twice. Occasionally, but less frequently, the articles may represent infringements of professional ethical codes, such as multiple submission, bogus claims of authorship, plagiarism, fraudulent use of data or the like. Articles in Press (articles that have been accepted for publication but which have not been formally published and will not yet have the complete volume/issue/page information) that include errors, or are discovered to be accidental duplicates of other published article(s), or are determined to violate our journal publishing ethics guidelines in the view of the editors (such as multiple submission, bogus claims of authorship, plagiarism, fraudulent use of data or the like), may be “Withdrawn” from SPEKTRUM INDUSTRI Journal Archive. Withdrawn means that the article content (HTML and PDF) is removed and replaced with a HTML page and PDF simply stating that the article has been withdrawn according to the SPEKTRUM INDUSTRI Policy on Article in Press Withdrawal with a link to the current policy document.

Article retraction

Infringements of professional ethical codes, such as multiple submission, bogus claims of authorship, plagiarism, fraudulent use of data or the like. Occasionally a retraction will be used to correct errors in submission or publication.The retraction of an article by its authors or the editor under the advice of members of the scholarly community has long been an occasional feature of the learned world. Standards for dealing with retractions have been developed by a number of library and scholarly bodies, and this best practice is adopted for article retraction by SPEKTRUM INDUSTRI:

• A retraction note titled “Retraction: [article title]” signed by the authors and/or the editor is published in the paginated part of a subsequent issue of the journal and listed in the contents list.
• In the electronic version, a link is made to the original article.
• The online article is preceded by a screen containing the retraction note. It is to this screen that the link resolves; the reader can then proceed to the article itself.
• The original article is retained unchanged save for a watermark on the .pdf indicating on each page that it is “retracted.”
• The HTML version of the document is removed.

Article removal: legal limitations

In an extremely limited number of cases, it may be necessary to remove an article from the online database. This will only occur where the article is clearly defamatory, or infringes others’ legal rights, or where the article is, or we have good reason to expect it will be, the subject of a court order, or where the article, if acted upon, might pose a serious health risk. In these circumstances, while the metadata (Title and Authors) will be retained, the text will be replaced with a screen indicating the article has been removed for legal reasons.

Article replacement

In cases where the article, if acted upon, might pose a serious health risk, the authors of the original article may wish to retract the flawed original and replace it with a corrected version. In these circumstances the procedures for retraction will be followed with the difference that the database retraction notice will publish a link to the corrected re-published article and a history of the document.

ARTICLE Plagiarism Policy

Plagiarism Includes But is Not Limited to:

• Refer and/or quoting terms, words and/or sentences, data and/or information from a source without citing sources in the record citation and/or without stating the source adequately;
• Refer and/or quoting random terms, words and/or sentences, data and/or information from a source without citing a source in the record citation and/or without stating the source adequately;
• Using a source of ideas, opinions, views, or theory without stating the source adequately;
• Formulate the words and/or sentences themselves from the source of words and/or phrases, ideas, opinions, views, or theory without stating the source adequately;
• Submit a scientific paper produced and/or published by others as sources of scientific work without express adequately.

Prevention

SPEKTRUM INDUSTRI will ensure that every published article will not exceed 20% similarity score. Plagiarism screening will be conducted by SPEKTRUM INDUSTRI using iThenticate. 

Sanctions

• Reprimand;
• Letter of warning;
• Revocation of the article;
• Cancellation of publication.

 

Generative AI Policy

Authors must declare the use of generative AI in scientific writing upon submission of the paper. The following guidance refers only to the writing process, and not to the use of AI tools to analyse and draw insights from data as part of the research process:

1. Generative AI and AI-assisted technologies should only be used in the writing process to improve the readability and language of the manuscript.
2. The technology must be applied with human oversight and control and authors should carefully review and edit the result, as AI can generate authoritative-sounding output that can be incorrect, incomplete or biased. Authors are ultimately responsible and accountable for the contents of the work.
3. Authors must not list or cite AI and AI-assisted technologies as an author or co-author on the manuscript since authorship implies responsibilities and tasks that can only be attributed to and performed by humans.

The use of generative AI and AI-assisted technologies in scientific writing must be declared by adding a statement at the end of the manuscript when the paper is first submitted. The statement will appear in the published work and should be placed in a new section before the references list. An example:

1. Title of new section: Declaration of generative AI and AI-assisted technologies in the writing process.

 

2. Statement: During the preparation of this work the author(s) used [NAME TOOL / SERVICE] in order to [REASON]. After using this tool/service, the author(s) reviewed and edited the content as needed and take(s) full responsibility for the content of the published article.

The declaration does not apply to the use of basic tools, such as tools used to check grammar, spelling and references. If you have nothing to disclose, you do not need to add a statement.

Please note: to protect authors’ rights and the confidentiality of their research, this journal does not currently allow the use of generative AI or AI-assisted technologies such as ChatGPT or similar services by reviewers or editors in the peer review and manuscript evaluation process. We are actively evaluating compliant AI tools and may revise this policy in the future.

Please read our policy on the use of generative AI and AI-assisted tools in figures, images and artwork. This policy states:

1. We do not permit the use of Generative AI or AI-assisted tools to create or alter images in submitted manuscripts.
2. The only exception is if the use of AI or AI-assisted tools is part of the research design or methods (for example, in the field of biomedical imaging). If this is the case, such use must be described in a reproducible manner in the methods section, including the name of the model or tool, version and extension numbers, and manufacturer.
3. The use of generative AI or AI-assisted tools in the production of artwork such as for graphical abstracts is not permitted. The use of generative AI in the production of cover art may in some cases be allowed, if the author obtains prior permission from the journal editor and publisher, can demonstrate that all necessary rights have been cleared for the use of the relevant material, and ensures that there is correct content attribution.