Prototype Design of Ergo-Flexibility Wheelchair Based on Stakeholder Technical Requirements, Zachman Framework Approach, and Nigel Cross Method Integration
DOI:
https://doi.org/10.12928/si.v23i2.356Keywords:
Ergo-flexibility wheelchair, Nigel cross, Prototype design, Standardization, Zachman frameworkAbstract
The increasing demand for ergonomic and flexible wheelchairs in Indonesia highlights the need for innovation that meets both user needs and national standards. Most wheelchairs circulating in the domestic market are low-cost imported products that do not comply with the ISO 7176 series SNI 09-4663-1998 medical device standard, leading to concerns over safety and quality assurance. This study aims to design an ergo-flexibility wheelchair prototype based on stakeholder technical requirements while identifying gaps in the existing standards to improve product competitiveness and user protection. The research integrates the Zachman Framework according to the FACTS stages with the Nigel Cross seven-step design method. Data were collected through observation, in-depth interviews, and participatory ergonomics focus group discussions. The data analysis employed the Inter-Rater Reliability (IRR) method to determine stakeholder agreement levels. The findings identified seven key technical parameters, stability, maneuverability, mobility, dimensions, strength, durability, and product information, that are essential for wheelchair standardization. The mapping analysis revealed that the current SNI standard primarily emphasizes product strength through drop testing, while other ergonomic and safety factors remain unaddressed. From the evaluation of three design alternatives, Alternative 2 was selected, featuring aluminum material, dimensions of 1000 mm (L), 620 mm (W), and 910 mm (H), a foldable transport design, semi-manual manufacturing, and a weight of 12 kg with an 80 kg load capacity. Prototype testing using a roll machine and static load confirmed its structural reliability and ergonomic performance. The research contributes to advancing national wheelchair standards by integrating stakeholder-driven design parameters, promoting local innovation, and enhancing the competitiveness of Indonesian medical devices.
References
Al-Haddad, M. A., & Al-Abed, M. S. (2021). Stakeholders’ Engagement and Performance Efficiency at Oil and Gas Industry in Yemen. Journal of Impact, 2(1), 1–15. https://doi.org/10.48110/joi.v2i1.25
Ardiansyah, Risnita, & Jailani, M. S. (2023). Teknik Pengumpulan Data Dan Instrumen Penelitian Ilmiah Pendidikan Pada Pendekatan Kualitatif dan Kuantitatif. Jurnal IHSAN: Jurnal Pendidikan Islam, 1(2), 1–9. https://doi.org/10.61104/ihsan.v1i2.57
Asefzadeh, S., Mamikhani, J., & Navvabi, E. (2016). Determination of Gap in Accreditation Standards Establishment Process Using Zachman Framework at a Health-Educational Hospital. Biotechnology and Health Sciences, inpress(inpress). https://doi.org/10.17795/bhs-38779
Ayundyahrini, M., Suprapto, S., Anggraeni, P., Fahma, F., & Sutopo, W. (2019). Penerapan dan Kemutakhiran Sni 09-4663-1998 Tentang Kursi Roda oleh Pemangku Kepentingan. Jurnal Standardisasi, 21(2), 135. https://doi.org/10.31153/js.v21i2.746
Esmaeili, R., Shakerian, M., Esmaeili, S. V., Jalali, M., Pouya, A. B., & Karimi, A. (2023). A multicomponent quasi-experimental ergonomic interventional study: long-term parallel four-groups interventions. BMC Musculoskeletal Disorders, 24(1), 107. https://doi.org/10.1186/s12891-023-06220-4
Ferretti, E. C., Suzumura, E., Rozman, L. M., Cooper, R. A., & de Soarez, P. C. (2023). Economic evaluation of wheelchairs interventions: a systematic review. Disability and Rehabilitation: Assistive Technology. https://doi.org/10.1080/17483107.2021.1993360
Gestel, R. Van, & Lochem, P. van. (2020). Private standards as a replacement for public lawmaking? The Role of the EU in Transnational Legal Ordering. https://www.elgaronline.com/abstract/edcoll/9781788118408/9781788118408.00009.xml
Haryanto, B., Denny, H. M., Nurmala, I., & Sitorus, R. J. (2025). Re-emerging Diseases Post-pandemic COVID-19: Indonesia’s Responses and Resilience. COVID-19: Impacts on Health and Health Systems. https://doi.org/10.1007/978-3-031-90255-0_7
Hasanain, B. (2024). The Role of Ergonomic and Human Factors in Sustainable Manufacturing: A Review. Machines, 12(3), 159. https://doi.org/10.3390/machines12030159
Hermawan, A. N., Masudin, I., Zulfikarijah, F., Restuputri, D. P., & Shariff, S. S. R. (2024). The effect of sustainable manufacturing on environmental performance through government regulation and eco-innovation. International Journal of Industrial Engineering and Operations Management, 6(4), 299–325. https://doi.org/10.1108/IJIEOM-04-2023-0039
Hernawati, M., Setiawan, A., & Iskandar, M. F. (2023). Pengaruh komunikasi dan disiplin kerja terhadap produktivitas kerja karyawan PT. Agrindo Maju Lestari di Kabupaten Tangerang. JURNAL EKONOMI Bisnis dan Humaniora. https://eksishum.untara.ac.id/index.php/eksishum/article/view/67
Irawan, M. Z., Rizki, M., Joewono, T. B., & Belgiawan, P. F. (2020). Exploring the intention of out-of-home activities participation during new normal conditions in Indonesian cities. In Transportation research Interdisciplinary Perpectives. Elsevier. https://www.sciencedirect.com/science/article/pii/S2590198220301482
imenez, D. L., Dittmar, E. C., & Portillo, J. P. V. (2021). New directions in corporate social responsibility and ethics: codes of conduct in the digital environment. Journal of Business Ethics. https://doi.org/10.1007/s10551-021-04753-z
Mokhtari, E., Heidarpour, A., & Javidan, F. (2024). Mechanical performance of high strength steel under corrosion: A review study. In Journal of Constructional Steel Research. Elsevier. https://www.sciencedirect.com/science/article/pii/S0143974X24003900
Naser, M. Y. M., & Bhattacharya, S. (2023). Towards practical BCI-driven wheelchairs: A systematic review study. IEEE Transactions on Neural Systems and Rehabilitation Engineering. https://ieeexplore.ieee.org/abstract/document/10015149/
Nasional, B. S. (2020). Sistem Informasi Standar Indonesia.[Online] Available at: http://sispk. bsn. go. id/SNI. In ICS_Detail_list/1014 [Accessed 28 Mei 2020].
Oliveira, S., Julio, L., Oliveira, R., & Midori, F. (2022). Stakeholders Engagement and Performance of Sustainable Information Quality. In Proceedings of the 27th International Scientific Conference Strategic Management and Decision Support Systems in Strategic Management.
Putri Cahyani, A., & Humaira Ramadhani, S. (2024). Optimizing Workplace and Employee Safety through Ergonomics: Scoping Review. SHS Web of Conferences, 189, 01007. https://doi.org/10.1051/shsconf/202418901007
Rachmawati, R., Sari, A. D., Sukawan, H. A. R., Widhyastana, I. M. A., & Ghiffari, R. A. (2021). The use of ict-based applications to support the implementation of smart cities during the covid-19 pandemic in Indonesia. In Infrastructures. mdpi.com. https://www.mdpi.com/2412-3811/6/9/119
Rasmussen, G. (2023). Analyzing interaction involving wheelchairs. Journal of Interactional Research in …. https://doi.org/10.1558/jircd.25573
Rodriguez, Y., Pérez, E., & Robertson, M. M. (2022). Ergonomic Maturity Model: A tool for integrating ergonomics/human factors into organizations. Work, 73(s1), S279–S292. https://doi.org/10.3233/WOR-211142
Ruslan Hadi, Yuliatri Sastrawijaya, & Vina Oktaviani. (2020). Pengaruh Pelatihan Penyusunan Soal Menggunakan Moodle Terhadap Kinerja Guru Dalam Menyusun Soal Test Di Sman 100 Jakarta. PINTER: Jurnal Pendidikan Teknik Informatika Dan Komputer, 4(2), 1–6. https://doi.org/10.21009/pinter.4.2.1
Sahu, A., & Pandit, S. (2025). Development of a new wax thread extruder machine to enhance productivity and reduce muscular strain in the Dhokra handicraft process: an unorganised sector in Indian handicraft industry. Ergonomics. https://doi.org/10.1080/00140139.2025.2456527
Sanaky, M. M. (2021). Analisis Faktor-Faktor Keterlambatan Pada Proyek Pembangunan Gedung Asrama Man 1 Tulehu Maluku Tengah. JURNAL SIMETRIK, 11(1), 432–439. https://doi.org/10.31959/js.v11i1.615
Setiawan, H. (2023). Sistem lingkungan industri. In Book.
Setiawan, H, Rinamurti, M., Kusmindari, C. D., Alfian, A, Pratama, Y. D., & Budiarto, D. (2023). Ergonomic hazard measurement, evaluation and controlling in the Pempek Palembang home industry based on SNI 9011: 2021. In International Journal of Innovative Science and Research technology. academia.edu. https://www.academia.edu/download/110162764/IJISRT23MAY2101.pdf
Setiawan, H, Susanto, S., Budiarto, D., Alfian, A., & Pratama, Y. D. (2025). Recommendations for sustainable waste management technology in Palembang City. Journal of Agricultural Sciences. https://annpublisher.org/ojs/index.php/agrosci/article/view/641
Setiawan, H, Susanto, S., Rinamurti, M., Alfian, A, Pratama., Y. D., Budiarto, D., & Clara, C. (2025). Ergo-technopreneurship training to improve knowledge and attitude of technology entrepreneurs Palembang local culinary traders. In Journal Of Economic Sciences. annpublisher.org. http://annpublisher.org/ojs/index.php/ekuisci/article/view/633
Setiawan, Heri, Susanto, S., Rinamurti, M., & Alfian, A. (2025). Design and Implementation of Green Human Resource Management (Green HRM) in SMEs Palembang City. Jurnal Ekuisci, 2(3), 188–198. https://doi.org/10.62885/ekuisci.v2i3.597
Setiawan, Heri, Susanto, S., Rinamurti, M., & Pratama, Y. D. (2025). Implementation of Ergo-Tourism and Local Wisdom to Design Tourism Village Governance Based on Balinese Cultur in Darma Buana, Belitang II South Sumatera Province. Jurnal Toursci, 2(3), 237–247. https://doi.org/10.62885/toursci.v2i3.618
Al-Haddad, M. A., & Al-Abed, M. S. (2021). Stakeholders’ Engagement and Performance Efficiency at Oil and Gas Industry in Yemen. Journal of Impact, 2(1), 1–15. https://doi.org/10.48110/joi.v2i1.25
Ardiansyah, Risnita, & Jailani, M. S. (2023). Teknik Pengumpulan Data Dan Instrumen Penelitian Ilmiah Pendidikan Pada Pendekatan Kualitatif dan Kuantitatif. Jurnal IHSAN: Jurnal Pendidikan Islam, 1(2), 1–9. https://doi.org/10.61104/ihsan.v1i2.57
Asefzadeh, S., Mamikhani, J., & Navvabi, E. (2016). Determination of Gap in Accreditation Standards Establishment Process Using Zachman Framework at a Health-Educational Hospital. Biotechnology and Health Sciences, inpress(inpress). https://doi.org/10.17795/bhs-38779
Ayundyahrini, M., Suprapto, S., Anggraeni, P., Fahma, F., & Sutopo, W. (2019). Penerapan dan Kemutakhiran Sni 09-4663-1998 Tentang Kursi Roda oleh Pemangku Kepentingan. Jurnal Standardisasi, 21(2), 135. https://doi.org/10.31153/js.v21i2.746
Esmaeili, R., Shakerian, M., Esmaeili, S. V., Jalali, M., Pouya, A. B., & Karimi, A. (2023). A multicomponent quasi-experimental ergonomic interventional study: long-term parallel four-groups interventions. BMC Musculoskeletal Disorders, 24(1), 107. https://doi.org/10.1186/s12891-023-06220-4
Ferretti, E. C., Suzumura, E., Rozman, L. M., Cooper, R. A., & de Soarez, P. C. (2023). Economic evaluation of wheelchairs interventions: a systematic review. Disability and Rehabilitation: Assistive Technology. https://doi.org/10.1080/17483107.2021.1993360
Gestel, R. Van, & Lochem, P. van. (2020). Private standards as a replacement for public lawmaking? The Role of the EU in Transnational Legal Ordering. https://www.elgaronline.com/abstract/edcoll/9781788118408/9781788118408.00009.xml
Haryanto, B., Denny, H. M., Nurmala, I., & Sitorus, R. J. (2025). Re-emerging Diseases Post-pandemic COVID-19: Indonesia’s Responses and Resilience. COVID-19: Impacts on Health and Health Systems. https://doi.org/10.1007/978-3-031-90255-0_7
Hasanain, B. (2024). The Role of Ergonomic and Human Factors in Sustainable Manufacturing: A Review. Machines, 12(3), 159. https://doi.org/10.3390/machines12030159
Hermawan, A. N., Masudin, I., Zulfikarijah, F., Restuputri, D. P., & Shariff, S. S. R. (2024). The effect of sustainable manufacturing on environmental performance through government regulation and eco-innovation. International Journal of Industrial Engineering and Operations Management, 6(4), 299–325. https://doi.org/10.1108/IJIEOM-04-2023-0039
Hernawati, M., Setiawan, A., & Iskandar, M. F. (2023). Pengaruh komunikasi dan disiplin kerja terhadap produktivitas kerja karyawan PT. Agrindo Maju Lestari di Kabupaten Tangerang. JURNAL EKONOMI Bisnis dan Humaniora. https://eksishum.untara.ac.id/index.php/eksishum/article/view/67
Irawan, M. Z., Rizki, M., Joewono, T. B., & Belgiawan, P. F. (2020). Exploring the intention of out-of-home activities participation during new normal conditions in Indonesian cities. In Transportation research Interdisciplinary Perpectives. Elsevier. https://www.sciencedirect.com/science/article/pii/S2590198220301482
Jimenez, D. L., Dittmar, E. C., & Portillo, J. P. V. (2021). New directions in corporate social responsibility and ethics: codes of conduct in the digital environment. Journal of Business Ethics. https://doi.org/10.1007/s10551-021-04753-z
Mokhtari, E., Heidarpour, A., & Javidan, F. (2024). Mechanical performance of high strength steel under corrosion: A review study. In Journal of Constructional Steel Research. Elsevier. https://www.sciencedirect.com/science/article/pii/S0143974X24003900
Naser, M. Y. M., & Bhattacharya, S. (2023). Towards practical BCI-driven wheelchairs: A systematic review study. IEEE Transactions on Neural Systems and Rehabilitation Engineering. https://ieeexplore.ieee.org/abstract/document/10015149/
Nasional, B. S. (2020). Sistem Informasi Standar Indonesia.[Online] Available at: http://sispk. bsn. go. id/SNI. In ICS_Detail_list/1014 [Accessed 28 Mei 2020].
Oliveira, S., Julio, L., Oliveira, R., & Midori, F. (2022). Stakeholders Engagement and Performance of Sustainable Information Quality. In Proceedings of the 27th International Scientific Conference Strategic Management and Decision Support Systems in Strategic Management.
Putri Cahyani, A., & Humaira Ramadhani, S. (2024). Optimizing Workplace and Employee Safety through Ergonomics: Scoping Review. SHS Web of Conferences, 189, 01007. https://doi.org/10.1051/shsconf/202418901007
Rachmawati, R., Sari, A. D., Sukawan, H. A. R., Widhyastana, I. M. A., & Ghiffari, R. A. (2021). The use of ict-based applications to support the implementation of smart cities during the covid-19 pandemic in Indonesia. In Infrastructures. mdpi.com. https://www.mdpi.com/2412-3811/6/9/119
Rasmussen, G. (2023). Analyzing interaction involving wheelchairs. Journal of Interactional Research in …. https://doi.org/10.1558/jircd.25573
Rodriguez, Y., Pérez, E., & Robertson, M. M. (2022). Ergonomic Maturity Model: A tool for integrating ergonomics/human factors into organizations. Work, 73(s1), S279–S292. https://doi.org/10.3233/WOR-211142
Ruslan Hadi, Yuliatri Sastrawijaya, & Vina Oktaviani. (2020). Pengaruh Pelatihan Penyusunan Soal Menggunakan Moodle Terhadap Kinerja Guru Dalam Menyusun Soal Test Di Sman 100 Jakarta. PINTER: Jurnal Pendidikan Teknik Informatika Dan Komputer, 4(2), 1–6. https://doi.org/10.21009/pinter.4.2.1
Sahu, A., & Pandit, S. (2025). Development of a new wax thread extruder machine to enhance productivity and reduce muscular strain in the Dhokra handicraft process: an unorganised sector in Indian handicraft industry. Ergonomics. https://doi.org/10.1080/00140139.2025.2456527
Sanaky, M. M. (2021). Analisis Faktor-Faktor Keterlambatan Pada Proyek Pembangunan Gedung Asrama Man 1 Tulehu Maluku Tengah. JURNAL SIMETRIK, 11(1), 432–439. https://doi.org/10.31959/js.v11i1.615
Setiawan, H. (2023). Sistem lingkungan industri. In Book.
Setiawan, H, Rinamurti, M., Kusmindari, C. D., Alfian, A, Pratama, Y. D., & Budiarto, D. (2023). Ergonomic hazard measurement, evaluation and controlling in the Pempek Palembang home industry based on SNI 9011: 2021. In International Journal of Innovative Science and Research technology. academia.edu. https://www.academia.edu/download/110162764/IJISRT23MAY2101.pdf
Setiawan, H, Susanto, S., Budiarto, D., Alfian, A., & Pratama, Y. D. (2025). Recommendations for sustainable waste management technology in Palembang City. Journal of Agricultural Sciences. https://annpublisher.org/ojs/index.php/agrosci/article/view/641
Setiawan, H, Susanto, S., Rinamurti, M., Alfian, A, Pratama., Y. D., Budiarto, D., & Clara, C. (2025). Ergo-technopreneurship training to improve knowledge and attitude of technology entrepreneurs Palembang local culinary traders. In Journal Of Economic Sciences. annpublisher.org. http://annpublisher.org/ojs/index.php/ekuisci/article/view/633
Setiawan, Heri, Susanto, S., Rinamurti, M., & Alfian, A. (2025). Design and Implementation of Green Human Resource Management (Green HRM) in SMEs Palembang City. Jurnal Ekuisci, 2(3), 188–198. https://doi.org/10.62885/ekuisci.v2i3.597
Setiawan, Heri, Susanto, S., Rinamurti, M., & Pratama, Y. D. (2025). Implementation of Ergo-Tourism and Local Wisdom to Design Tourism Village Governance Based on Balinese Cultur in Darma Buana, Belitang II South Sumatera Province. Jurnal Toursci, 2(3), 237–247. https://doi.org/10.62885/toursci.v2i3.618
Suryono, T. J., Atmoko, D. F., Pamungkas, A. E., Sudarno., Kiswanta., Santoso, S., Moerani, R., Purwaningsih, A., Setiawan, M. A., & Dwiardhika, D. (2025). A human factors engineering-based verification of standing consoles design for SMR control rooms. Nuclear Engineering and Design. https://www.sciencedirect.com/science/article/pii/S0029549325006132
Vosoughi, S., Niazi, P., Abolghasemi, J., & Sadeghi-Yarandi, M. (2024). The relationship between the level of postural stress, Musculoskeletal Disorders, and chronic fatigue: A case study in the dairy industry. Work, 78(3), 771–781. https://doi.org/10.3233/WOR-230309
Win, T. T., Raengthon, N., & Prasittisopin, L. (2024). Advanced cement composites: Investigating the role of graphene quantum dots in improving thermal and mechanical performance. Journal of Building Engineering. https://www.sciencedirect.com/science/article/pii/S2352710224021247
Witherell, P., Rachuri, S., Narayanan, A., & Lee, J. H. (2013). FACTS: a framework for analysis, comparison, and testing of standards. In National Intitute of Standards and Technology. academia.edu. https://www.academia.edu/download/70760949/99420f5ffc43d3272c844bbe16bc0e3342cf.pdf
Zainuddin, Z., & Aulia, A. (2024). Analisis Peran Stakeholder Terhadap Kesuksesan Proyek Konstruksi. Tameh, 10(2), 102–111. https://doi.org/10.37598/tameh.v10i2.164
Zhang, Z., Xie, J., Zhang, J., Yang, X. S., & Wu, R. (2024). Towards designing high mechanical performance low-alloyed wrought magnesium alloys via grain boundary segregation strategy: A review. In Journal of Magnesium and Alloys. Elsevier. https://www.sciencedirect.com/science/article/pii/S2213956724001208
Zhen, H., Xiong, Z., Song, Y., Li, L., Qiu, Y., Zou, X., Chen, B., Chen, D., Liu, F., & Ji, Y. (2024). Early mechanical performance of glass fibre-reinforced manufactured sand concrete. Journal of Building Engineering. https://www.sciencedirect.com/science/article/pii/S235271022400007X
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Heri Setiawan, Tri Budiyanto, Micheline Rinamurti, Dominikus Budiarto, Yohanes Dicka Pratama, Achmad Alfian
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
.png)
